{"id":593,"date":"2026-05-08T05:42:20","date_gmt":"2026-05-08T05:42:20","guid":{"rendered":"https:\/\/foragebaler.com\/?post_type=product&p=593"},"modified":"2026-05-08T05:42:20","modified_gmt":"2026-05-08T05:42:20","slug":"9ycm-850-silage-baler-wrapper-combination","status":"publish","type":"product","link":"https:\/\/foragebaler.com\/tr\/urun\/9ycm-850-silage-baler-wrapper-combination\/","title":{"rendered":"9YCM-850 Silaj Balya Makinesi-Sarma Makinesi Kombine | Saatte 30-40 Balya"},"content":{"rendered":"
\n

The Silage Science: Why Minutes Matter Between Baling and Wrapping<\/h2>\n

<\/p>\n

\n
\n
30\u201340<\/div>\n
balya\/saat<\/div>\n<\/div>\n
\n
1-pass<\/div>\n
bale & wrap<\/div>\n<\/div>\n
\n
2.5 m\u00b3<\/div>\n
hopper<\/div>\n<\/div>\n
\n
\u03a685\u201390<\/div>\n
cm bale dia.<\/div>\n<\/div>\n
\n
120+<\/div>\n
HP required<\/div>\n<\/div>\n<\/div>\n

The 9YCM-850’s integrated design is not a convenience feature \u2014 it’s a direct response to the fermentation biology of high-moisture forage. Understanding why the wrapper must follow the baler immediately, rather than after a delay, explains why an integrated machine produces measurably better silage than a two-machine workflow with a time gap between baling and wrapping.<\/p>\n

\"9YCM-850<\/p>\n

<\/p>\n

\n
\ud83d\udd2c Fermentation Biology: The 30-Minute Exposure Window<\/div>\n
\n
\n
0\u201315 minutes<\/div>\n

Oxygen is trapped between the crop material. Aerobic respiration by plant cells and mold spores begins, consuming water-soluble carbohydrates \u2014 the primary fuel for desirable lactic acid bacteria.<\/p>\n<\/div>\n

\n
15\u201360 minutes<\/div>\n

Yeast and mold activity accelerates. CO\u2082 generation increases temperature inside the unwrapped bale. Each 1\u00b0C rise above 30\u00b0C in the fermentation phase reduces final silage dry matter content by 0.3\u20130.5 percentage points.<\/p>\n<\/div>\n

\n
Sealed immediately<\/div>\n

Oxygen is excluded within seconds of bale completion. Residual oxygen is consumed by aerobic bacteria within 24\u201348 hours. LAB (lactic acid bacteria) achieve anaerobic conditions rapidly, producing the lactic acid that drops pH to 4.0\u20134.5 and preserves DM at 90\u201395% of theoretical maximum.<\/p>\n<\/div>\n<\/div>\n

Source basis: USDA National Institute of Food and Agriculture extension recommendations on silage bale wrapping timing. Target wrap gap: under 4 hours from baling; under 60 minutes for maximum DM preservation at high moisture (>70%).<\/p>\n<\/div>\n

The 9YCM-850 eliminates the exposure window entirely: the bale completes in the fixed chamber, transfers automatically to the integrated wrapper turntable, and is sealed in stretch film in the same field pass \u2014 the maximum exposure time between baling completion and seal-start is under 60 seconds during normal operation. This is not achievable with a separate baler-plus-standalone-wrapper workflow, where bales typically sit for 30 minutes to several hours depending on operator capacity and field layout.<\/p>\n

<\/p>\n

Teknik \u00d6zellikler<\/h2>\n

The 9YCM-850 connects to the tractor via rear three-point hitch, 540 rpm rear PTO, and two rear hydraulic remote outlets (one \u00bd-inch, one \u00be-inch). A 12 V DC connection to the tractor’s electrical system powers the electronic control panel. Verify all four connection types \u2014 PTO, hitch, hydraulics, and 12V \u2014 are available on your tractor before ordering.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
HAYIR.<\/th>\nParametre<\/th>\nBirim<\/th>\nDe\u011fer<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\n\u00dcr\u00fcn<\/td>\n\/<\/td>\n9YCM-850 Integrated Baler-Wrapper<\/strong><\/td>\n<\/tr>\n
2<\/td>\nBale Size (D \u00d7 L)<\/td>\ncm<\/td>\n\u03a6 85\u201390 \u00d7 85 cm<\/strong><\/td>\n<\/tr>\n
3<\/td>\nBale Volume<\/td>\nm\u00b3<\/td>\n0.48\u20130.54<\/td>\n<\/tr>\n
4<\/td>\nHopper Volume<\/td>\nm\u00b3<\/td>\n2.5<\/strong><\/td>\n<\/tr>\n
5<\/td>\nGerekli Trakt\u00f6r G\u00fcc\u00fc<\/td>\nHP (kW)<\/td>\n\u2265 120 HP (\u224888 kW)<\/strong><\/td>\n<\/tr>\n
6<\/td>\nOuter Dimensions (L\u00d7W\u00d7H)<\/td>\nm (ft)<\/td>\n7.00 \u00d7 2.19 \u00d7 3.03 (23.0 \u00d7 7.2 \u00d7 9.9 ft)<\/td>\n<\/tr>\n
7<\/td>\nTire Size<\/td>\n\/<\/td>\n295\/60-15<\/td>\n<\/tr>\n
8<\/td>\nPTO H\u0131z\u0131<\/td>\nrpm<\/td>\n540<\/td>\n<\/tr>\n
9<\/td>\nHydraulic Requirement<\/td>\n\/<\/td>\n1 \u00d7 \u00bd in + 1 \u00d7 \u00be in outlets<\/td>\n<\/tr>\n
10<\/td>\nElectrical Requirement<\/td>\n\/<\/td>\n12 V DC (tractor battery circuit)<\/td>\n<\/tr>\n
11<\/td>\nControl System<\/td>\n\/<\/td>\nElectronic (bale count + wrap count display)<\/td>\n<\/tr>\n
12<\/td>\nVerimlilik<\/td>\nbalya\/saat<\/td>\n30\u201340<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

The Four-Stage Continuous Cycle: Load \u2192 Bale \u2192 Wrap \u2192 Eject<\/h2>\n
<\/div>\n

\"9YCM-850<\/p>\n

\n
\n
1<\/div>\n
\ud83d\udce5<\/div>\n

LOAD<\/strong><\/p>\n

Fresh-cut high-moisture crop material feeds into the 2.5 m\u00b3 hopper from a mower-conditioner or direct from windrow. The large hopper handles uneven in-field windrow density without plugging, maintaining continuous material flow to the bale chamber at 30\u201340 bale cycles per hour.<\/p>\n<\/div>\n

\n
2<\/div>\n
\ud83d\udd04<\/div>\n

BALE<\/strong><\/p>\n

Material is compressed in the fixed-chamber baling section to the target \u03a685\u201390 \u00d7 85 cm density. The electronic control system monitors bale density and triggers the net or twine binding cycle automatically when the set density is reached \u2014 no manual monitoring required.<\/p>\n<\/div>\n

\n
3<\/div>\n
\ud83c\udf00<\/div>\n

WRAP<\/strong><\/p>\n

The completed bale transfers automatically to the integrated wrapper turntable \u2014 the critical handoff that happens in under 60 seconds. The rotating arm applies 750 mm UV-resistant stretch film in the operator-selected number of layers (typically 4\u20138 layers depending on crop moisture and storage duration).<\/p>\n<\/div>\n

\n
4<\/div>\n
\u2705<\/div>\n

EJECT<\/strong><\/p>\n

The sealed bale rolls off the rear, landing in the field with the sealed wrap intact and undamaged by the drop. The tractor continues forward through the windrow without stopping \u2014 the cycle resets automatically and the next bale begins forming while the previous one is still wrapping. Bale count registers on the electronic display.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Wrap Film Application Guide: Layers by Crop and Storage Duration<\/h2>\n

Film layer count is the single operator-controlled variable that has the greatest impact on silage quality during the storage period. Too few layers allow micro-punctures from field debris and UV degradation to admit oxygen over time; too many layers increase film cost beyond what fermentation quality requires. The table below gives the industry-standard recommendations for each major crop type and storage scenario.<\/p>\n

\n\n\n\n\n\n\n\n\n\n
Crop \/ Material<\/th>\nMoisture at Baling<\/th>\nMin. Film Layers<\/th>\nStorage Duration<\/th>\nNotlar<\/th>\n<\/tr>\n<\/thead>\n
Fresh-cut grass silage<\/td>\n65\u201375%<\/td>\n6<\/td>\n6\u201312 months<\/td>\nMost common use case; 6 layers is the NRCS recommended minimum for full-season outdoor storage<\/td>\n<\/tr>\n
Corn silage (whole plant)<\/td>\n60\u201368%<\/td>\n6\u20138<\/td>\n6\u201318 months<\/td>\nCorn stalk edges can puncture film \u2014 8 layers recommended if stalks are not shredded at harvest<\/td>\n<\/tr>\n
Alfalfa \/ legume silage<\/td>\n55\u201365%<\/td>\n4\u20136<\/td>\n3\u20138 months<\/td>\nLower moisture reduces fermentation pressure on wrap; 4 layers sufficient for under 6 months storage<\/td>\n<\/tr>\n
High-moisture grain (HMG)<\/td>\n25\u201335%<\/td>\n8<\/td>\nUp to 18 months<\/td>\nLong storage duration increases UV and mechanical puncture risk; 8 layers mandatory for full-season exposure<\/td>\n<\/tr>\n
Hay silage \/ haylage<\/td>\n45\u201360%<\/td>\n4\u20136<\/td>\n3\u20136 months<\/td>\nPartially wilted material; higher DM means lower internal gas pressure \u2014 4 layers functional for short-term use<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The 9YCM-850 accepts standard 750 mm \u00d7 1,500 m UV-resistant white or black stretch film rolls. White film is preferred for outdoor long-term storage as it reflects solar radiation and reduces internal bale temperature. Black film reduces UV penetration but increases heat absorption in summer. Confirm with your film supplier that the stretch ratio is rated at 50\u201370% elongation \u2014 under-stretched film loses barrier integrity under bale compression.<\/p>\n

<\/p>\n

Who Benefits Most from the One-Pass System<\/h2>\n
<\/div>\n
\n
\n
\ud83d\udc04 Dairy High-Moisture Grass Silage Programs<\/div>\n
Large dairy operations in Wisconsin, New York, and Vermont where perennial ryegrass and orchardgrass silage at 65\u201375% moisture is the primary basal feed through the winter. The one-pass system allows cutting and baling on the same day across large acreages \u2014 matching the agronomic ideal of cutting grass at the boot stage and preserving it before weather can wilt it below target moisture. Dairy nutritionists consistently rate same-day-sealed bale silage above multi-day delayed wrapped bales on fermentation quality scoring.<\/div>\n<\/div>\n
\n
\ud83d\udce6 Custom-Wrap Contractor Services<\/div>\n
Custom wrapping contractors in the Northeast and Great Lakes states who serve 15 to 30 client farms per season face a specific logistics challenge: clients want wrapping done the same day their grass is cut. The 9YCM-850 allows a contractor to bale and wrap a 50-acre field in a single day \u2014 a job that requires two separate equipment setups and a next-day return trip under a conventional two-machine workflow. Reducing each client engagement to a single day makes the contractor’s seasonal schedule more predictable and increases the number of billable clients per season.<\/div>\n<\/div>\n
\n
\ud83c\udf3d Corn Silage on Confined Beef Operations<\/div>\n
Feedlot and confined beef operations in Iowa, Nebraska, and Kansas that grow silage corn on-farm and process it into round bales for winter feeding can use the 9YCM-850 to build a wrapped bale inventory that stores without the silo infrastructure of conventional corn silage bunkers. Round bale silage requires no concrete, no bunker management, and no daily face management \u2014 bales are unsealed individually as needed, minimizing waste and allowing flexible daily ration adjustments.<\/div>\n<\/div>\n
\n
\ud83c\udf31 Specialty Crops and TMR Feedstock<\/div>\n
Small-acreage organic dairy and goat\/sheep operations in California, Oregon, and Idaho use the 9YCM-850 for baling and preserving a diverse mix of forages \u2014 small-grain silage, brassica intercrops, and grass-legume mixes \u2014 each in small lots of 5 to 30 bales per cut. The electronic bale count display allows exact inventory tracking by cut date and crop variety, which supports the detailed feed records required for organic certification audits.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

One-Pass vs Two-Machine: The Economics of Integration<\/h2>\n

The 9YCM-850 replaces two separate machines \u2014 a round baler and a standalone bale wrapper. The capital cost comparison is the starting point, but the operating economics over a 5-year season cycle make the integrated argument stronger:<\/p>\n

\"9YCM-850<\/p>\n

\n
\n
Conventional Setup<\/div>\n
Round Baler + Standalone Wrapper<\/div>\n
\n
\ud83d\udccc Two machines to purchase, insure, and maintain<\/div>\n
\ud83d\udccc Two operators or a second pass with same operator<\/div>\n
\ud83d\udccc Bales sit unwrapped 30 min\u20134 hours in field<\/div>\n
\ud83d\udccc Standalone wrapper requires its own transport move<\/div>\n
\ud83d\udccc DM losses of 5\u201315% in the unwrapped window at >70% moisture<\/div>\n
\ud83d\udccc Two parts inventories, two service points, double breakdown risk<\/div>\n<\/div>\n<\/div>\n
\n
Integrated System<\/div>\n
9YCM-850 One-Pass<\/div>\n
\n
\u2714<\/strong> One machine, one insurance premium, one maintenance schedule<\/div>\n
\u2714<\/strong> Single operator completes baling and wrapping simultaneously<\/div>\n
\u2714<\/strong> Wrap starts within 60 seconds of bale completion<\/div>\n
\u2714<\/strong> No second machine transport move required<\/div>\n
\u2714<\/strong> DM preservation at 90\u201395% of theoretical maximum<\/div>\n
\u2714<\/strong> One parts source, one service team, one downtime event covers both functions<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Upstream Equipment: Building a Complete Silage System<\/h2>\n
\"high-torque<\/div>\n

The 9YCM-850 processes material that has already been cut and windrow-conditioned upstream. The quality of that upstream operation determines whether the hopper receives a clean, consistent material flow or a problematic one. Three upstream equipment choices matter most:<\/p>\n

Mowing Equipment:<\/strong> Clean-cut conditioned material feeds more uniformly into the 9YCM-850 hopper than unconditioned swath. Our \u00e7im bi\u00e7me ekipman\u0131<\/a> includes disc and sickle-bar mowers for the crop widths and field conditions common to U.S. silage operations.<\/p>\n

Windrow Preparation:<\/strong> A properly formed, consistent-density windrow prevents the surge-and-gap feeding pattern that causes bale density variation in the 9YCM-850 chamber. Our saman t\u0131rm\u0131\u011f\u0131 dizilimi<\/a> produces uniform windrows from 5 to 12 meters of cut width, matched to the working speeds at which high-moisture silage crops are raked without excessive leaf shatter.<\/p>\n

Driveline at 120+ HP:<\/strong> At 88+ kW PTO input, the 9YCM-850 imposes both continuous compaction torque and instantaneous load spikes when dense windrow material surges into the chamber at field speed. A correctly specified high-torque agricultural gearbox<\/a> in the PTO driveline absorbs those spikes while maintaining consistent conveyor and compaction roller speed \u2014 critical because bale density variation across the compaction cycle affects final silage DM content and fermentation uniformity. For the 9YCM-850’s 88+ kW input range, the gearbox should be rated for continuous input torque above 1,000 Nm with a peak tolerance of 2,000+ Nm.<\/p>\n

<\/p>\n

Pre-Season Readiness Checklist and Maintenance<\/h2>\n
\"foragebaler.com<\/div>\n

The 9YCM-850 combines a baling mechanism, a film delivery system, and an electronic control module \u2014 three mechanical sub-systems that each need pre-season verification. Run through this checklist before the first cut of each season:<\/p>\n

\n
\n

\ud83d\udd29 Baling Mechanism<\/strong><\/p>\n

\n
\u2714 Inspect all compression roller bearings \u2014 replace any showing play or rough rotation<\/div>\n
\u2714 Check baling chamber belts or chains for elongation and wear<\/div>\n
\u2714 Verify net\/twine binding cycle completes cleanly in 3 test bales before field work<\/div>\n
\u2714 Lubricate all chain and bearing grease points (see manual section 4)<\/div>\n<\/div>\n<\/div>\n
\n

\ud83c\udf9e Film Delivery System<\/strong><\/p>\n

\n
\u2714 Load a fresh film roll and complete 3 full wrap cycles before field work<\/div>\n
\u2714 Inspect film arm rotation bearing for any binding or wobble<\/div>\n
\u2714 Verify film cutter blade is sharp and cuts cleanly \u2014 a dull blade causes film tailing that can tangle in the bale ejection path<\/div>\n
\u2714 Check pre-stretch rollers for surface wear \u2014 worn rollers under-stretch film<\/div>\n<\/div>\n<\/div>\n
\n

\ud83d\udca1 Electronic Control Panel<\/strong><\/p>\n

\n
\u2714 Test all control functions (density set, wrap count, bale counter) before field start<\/div>\n
\u2714 Inspect 12V DC wiring harness for any rodent damage over winter<\/div>\n
\u2714 Verify all sensor connections are clean and securely seated<\/div>\n
\u2714 Reset bale counter and verify it counts accurately on the first 5 test bales<\/div>\n<\/div>\n<\/div>\n
\n

\ud83d\udd27 Mid-Season (Every 100 Bales)<\/strong><\/p>\n

\n
\u2714 Regrease all zerk fittings \u2014 every 50 bales in very dusty conditions<\/div>\n
\u2714 Re-check roller chain tension on baling drive \u2014 adjust if elongation visible<\/div>\n
\u2714 Inspect bale ejection ramp for deformation or debris accumulation<\/div>\n
\u2714 Clean any crop buildup from around the hydraulic cylinder pivots<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Why U.S. Silage Producers Choose foragebaler.com<\/h2>\n
\n
Film and Wear Parts Stocked in California.<\/strong> Net twine, compression rollers, film arm bearings, and chain sets available with same-day dispatch from the U.S. warehouse \u2014 critical during the 2 to 3 week silage cutting window when downtime has direct feed-cost consequences.<\/div>\n
Tractor Compatibility Review Before Ordering.<\/strong> Hydraulic flow rates, hitch lift capacity, PTO output, and 12V circuit capacity confirmed from your tractor’s serial number \u2014 preventing the most common installation surprises with integrated baler-wrapper machines.<\/div>\n
ISO 9001 Quality Documentation.<\/strong> Complete quality certification package for USDA FSA documentation and Section 179 first-year expensing. Learn more about our standards on our Hakk\u0131m\u0131zda<\/a> sayfa.<\/div>\n
Round Baler Range Integration.<\/strong> The 9YCM-850 integrates naturally with our round baler range<\/a> and upstream mowing equipment from one supplier \u2014 simplifying parts sourcing and technical support across your full silage operation.<\/div>\n<\/div>\n

<\/p>\n

S\u0131k\u00e7a Sorulan Sorular<\/h2>\n
\n
\n
\n
<\/div>\n
\n

What moisture level is required for silage bale wrapping to work?<\/strong><\/p>\n

Effective lactic acid fermentation requires material moisture above 40%. Below 40%, insufficient water activity limits LAB reproduction and pH drop. Optimal silage baling range is 55\u201375% moisture for most grass and legume crops. Corn silage is typically baled at 60\u201368%. At moisture above 75%, butyric acid fermentation risk increases \u2014 harvest before this threshold. If you are unsure of your crop moisture, a handheld forage moisture meter provides on-field readings before cutting decision.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

How long can sealed bales be stored before feeding?<\/strong><\/p>\n

Well-sealed bales with 6+ layers of UV-resistant film store reliably for 12 to 18 months outdoors. Fermentation completes within 3 to 6 weeks of baling, after which the bale enters stable anaerobic storage. Inspect the exterior of stored bales monthly \u2014 any puncture or bird damage should be repaired immediately with repair tape to prevent aerobic spoilage from developing at the damage point.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

What film roll dimensions does the 9YCM-850 accept?<\/strong><\/p>\n

Standard 750 mm wide \u00d7 1,500 m length rolls at 25 micron nominal thickness. The machine’s film arm and pre-stretch rollers are designed for this international standard dimension, which is the most widely stocked silage film specification in North American agricultural supply chains. Using non-standard widths or ultra-thin film (under 22 microns) requires consultation with the U.S. support team before field use.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Does the machine require a separate operator to manage the wrapping section?<\/strong><\/p>\n

No \u2014 the electronic control system manages the bale transfer from the baling chamber to the wrapping turntable and initiates the wrap cycle automatically when the completed bale triggers the transfer sensor. The tractor operator controls the machine via the electronic panel in the cab. A second person is not required under normal field conditions, though some operators choose to station a helper to monitor ejected bale condition on the first day of the season.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Can the baling section be used without the wrapper for dry hay baling?<\/strong><\/p>\n

Yes \u2014 the baling section operates independently at 540 rpm PTO for conventional dry hay baling. The wrapper can be disengaged via the electronic control panel when producing twine- or net-tied dry hay bales. This makes the 9YCM-850 a dual-purpose machine: silage wrapping during the high-moisture cutting season and conventional baling for the hay cutting season, on the same 120 HP tractor.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

How long does assembly take on delivery?<\/strong><\/p>\n

The 9YCM-850 ships partially disassembled for transit. On-farm assembly involves connecting the PTO driveshaft, attaching the hydraulic hoses to the correct tractor outlets (\u00bd-inch for the baling function, \u00be-inch for the wrapper), connecting the 12V harness, and installing the film roll. Total assembly time is 2 to 3 hours for two operators using the illustrated assembly guide. The U.S. team is available by phone for real-time guidance on the hydraulic connection sequence, which is the most operator-specific step.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

What happens if the film runs out mid-field?<\/strong><\/p>\n

The electronic control panel displays the approximate number of wraps remaining based on the bale count versus roll length. The operator receives an alert before the film runs out. When a roll ends, the wrapper pauses, the operator loads a new roll (under 3 minutes with practice), and the cycle resumes. Bales that are partially wrapped when a roll runs out should be immediately completed with a fresh roll or hand-wrapped before storage \u2014 do not leave partially wrapped silage bales in the field.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

How does the 9YCM-850 compare to purchasing a separate baler and wrapper?<\/strong><\/p>\n

The integrated design reduces total capital cost by 20\u201330% compared to purchasing a commercial round baler and a standalone bale wrapper separately. Beyond capital cost, it eliminates the second-machine logistics and operator time, reduces DM losses from delayed wrapping, and halves the parts inventory and maintenance overhead. For operations producing more than 500 wrapped bales per season, the DM preservation improvement alone \u2014 typically 5 to 10 percentage points over delayed wrapping \u2014 recovers a substantial portion of the machine cost in feed value saved within the first two seasons.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Five Silage Producers: Season Results<\/h2>\n

<\/p>\n

\n
\n
\n
“<\/div>\n

We milk 320 Holsteins and silage grass is 60% of our basal diet. Before the 9YCM-850 we baled with a standalone baler and wrapped the next morning \u2014 always late by 12 to 18 hours. Sample fermentation scoring from our nutritionist showed consistently low lactic acid scores. First season with the 9YCM-850, same grass, same cutting schedule, scores improved significantly. The one-pass seal makes a measurable difference in the finished product we are feeding the herd.<\/p>\n<\/div>\n

\u25b2 Patricia Sorenson \u2014 Dane County, WI \u2b50\u2b50\u2b50\u2b50\u2b50<\/div>\n<\/div>\n
\n
\n
\n
“<\/div>\n

Custom silage wrapping service for 28 client farms in Columbia and Greene counties. The 9YCM-850 made same-day service on every farm possible \u2014 before, I had to schedule return trips for wrapping. Client satisfaction improved and I took on six additional farms this season without adding equipment. The 30-to-40-bale-per-hour rate means I can complete a 50-acre grass field in under four hours including moves.<\/p>\n<\/div>\n

Marcus Webb \u2014 Columbia County, NY \u2b50\u2b50\u2b50\u2b50\u2b50 \u25b2<\/div>\n<\/div>\n<\/div>\n
\n
\n
“<\/div>\n

We grow on-farm corn silage for 450 stocker cattle in central Pennsylvania. Switched from a bunker silo to wrapped round bales for the flexibility of opening only what we need each day. The 9YCM-850 completed 380 corn silage bales this fall in two days of field work. No bunker face management, no waste from overheating when opening too large a face, and the per-bale inventory system lets us track our feed budget exactly. Four stars because the 9.9 ft transport height requires careful routing on our county roads.<\/p>\n<\/div>\n

\u25b2 Tim Hershberger \u2014 Centre County, PA \u2b50\u2b50\u2b50\u2b50<\/div>\n<\/div>\n
\n
\n
\n
“<\/div>\n

300-acre certified organic dairy in the Treasure Valley. We bale multiple forage varieties \u2014 ryegrass, triticale, and a grass-legume mix \u2014 in small lots per variety. The electronic bale counter and ability to pause and label bales by variety makes inventory tracking straightforward for our organic certification records. The dual-use feature, baling conventional dry hay in summer and silage in spring and fall on the same machine, means the 9YCM-850 is active almost all season. Very satisfied.<\/p>\n<\/div>\n

Heather Nakamura \u2014 Gem County, ID \u2b50\u2b50\u2b50\u2b50\u2b50 \u25b2<\/div>\n<\/div>\n<\/div>\n
\n
\n
“<\/div>\n

We run a small goat dairy on 80 acres of mixed perennial pasture in Sonoma County \u2014 small cuts of 15 to 25 bales, multiple varieties, strict feed inventory records for our direct-sales marketing. The 9YCM-850 was bought specifically because we could not justify two separate machines on this scale. The integration gives us commercial silage quality on a small-farm volume. The U.S. support team helped us configure the electronic panel for our three different forage programs \u2014 excellent pre-purchase consultation.<\/p>\n<\/div>\n

\u25b2 Alison Ferrara \u2014 Sonoma County, CA \u2b50\u2b50\u2b50\u2b50\u2b50<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\"9YCM-850<\/div>\n

<\/p>\n

\n

Seal Your Silage in the Same Pass You Bale It<\/h3>\n

No-obligation quote for the 9YCM-850 silage baler-wrapper. Tractor compatibility (PTO, hydraulic outlets, 12V circuit) verified before shipment. Direct factory pricing, Section 179 documentation, U.S. support included.
\nAmerica Ever-Power Forage Baler Equipment INC. | 1401 21st ST STE R, Sacramento, CA 95811<\/p>\n

\u00dccretsiz Fiyat Teklifi Al\u0131n<\/a><\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

\n

O 9YCM-850 silage baler wrapper<\/strong> compresses fresh, high-moisture crop material and seals it in stretch film in a single continuous field pass \u2014 no stopping, no second machine, no exposure window for oxygen to enter the bale. At 30 to 40 sealed bales per hour, it is the highest-throughput one-pass silage preservation solution in our equipment range, designed for dairy farms running large-scale grass and corn silage programs, custom-wrap contractors servicing multiple clients per week, and beef operations transitioning from dry hay to fermented silage for winter feeding.<\/p>\n<\/div>","protected":false},"featured_media":601,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[29],"product_tag":[],"class_list":["post-593","product","type-product","status-publish","has-post-thumbnail","product_cat-other-product","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/product\/593","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/comments?post=593"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/media\/601"}],"wp:attachment":[{"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/media?parent=593"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/product_brand?post=593"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/product_cat?post=593"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/foragebaler.com\/tr\/wp-json\/wp\/v2\/product_tag?post=593"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}