مكبس بالات مربعة صغيرة 9YF-1900 - وحدة التقاط 1900 مم، 50-99 حصان

Mid-Width Square Baler · 1,900mm · 50–99HP · 1,850kg

The 9YF-1900 sits between the compact 9YF-1700 and the full-width 9YF-2200 — a 1,900mm spring-tooth pickup that covers a productive swath on 50–99HP tractors, in a machine that is 100kg lighter and 735mm shorter than the 2200. For operations where a standard 55–75HP utility tractor is the primary field machine and a full 2.2m pickup width is more than the operation needs, the 9YF-1900 is the practical fit.

في 1850 كجم with dual D-type knotters, fork feeder and auto rope binding, it handles the same crop range as the full series — wheat straw, rice straw, corn stover, cotton stalks and all forage grass — in a بالة 460×360 مم suited to hand handling and standard small loaders.

Straw and Residue Recovery

The 1,900mm spring-tooth pickup handles the standard post-combine windrow from most 1.8–2m combine cutting headers without a raking pre-pass in normal windrow conditions. The machine is rated for paddy field and dry field operation on flat, stone-free ground where bale density is consistent and the rope binding holds firmly.

• ▸قش القمح والشعير — handles standard single-windrow output from typical 2m headers efficiently
• ▸قش الأرز — manages post-paddy windrows when properly raked to within the 1,900mm pickup width
• ▸سيقان الذرة — suitable for windrowed corn residue at the lower end of forward speed range within the 50–75HP tractor pairing
• ▸سيقان القطن — handles shredded cotton residue on flat field conditions

إنتاج التبن والعلف

For hay operations using a جزازة العلف in the 1.5–2m cut-width class, the 9YF-1900 covers the windrow efficiently and produces the consistent small square bale format suited to horse operations, retail sales and small-to-medium livestock feeding programs.

• ▸العشب والتبن المختلط — orchardgrass, fescue, bermuda, native prairie and mixed grass windrows
• ▸تبن البرسيم — handles dry alfalfa at 14–18% moisture; suitable for barn storage and short-term outdoor use
• ▸أنواع مختلفة من الأعشاب العلفية — full range of standard forage crops under normal flat-field conditions

The 9YF-1900 frame is built from welded structural steel sections designed to absorb the cyclic load of the knotting mechanism and plunger across a full baling season. At 4,965mm overall length the machine is more compact than the 2200, which also reduces frame bending moment and the stress concentrations that longer frames carry at the hitch and plunger guide points.

Gear transmission drives the plunger and knotter mechanism at consistent speed under varying PTO load — maintaining knot timing accuracy when the chamber fill rate varies with windrow density changes across the field. The gear drive runs cooler than belt-primary alternatives in sustained operation, which extends component life at the top of the PTO power range.

Two D-type knotters tie the bale at both sides of the 460mm chamber width — producing a well-secured bale that maintains its rectangular cross-section during loader handling, transport and stacking. The D-type mechanism is a proven design with straightforward maintenance and readily available replacement parts through agricultural equipment suppliers.

I run a 68HP tractor and the 9YF-1900 fits it perfectly — comfortable in wheat straw at good forward speed and still adequate for my hay ground without laboring the engine. The 1,900mm pickup covers my combine windrows without a raking pre-pass, which saves me a field operation each harvest. Bale quality is consistent and the knotters have not missed a tie in two full seasons. For my 85 acres this machine is exactly the right scale.

Switched from a round baler to the 9YF-1900 after my horse boarding customers kept asking for small square bales they could store in their tack room. The 1,900mm pickup handles my alfalfa windrows well — I rake to a 1.6m windrow first and the machine picks it up cleanly. Bale weights average 28kg, which my customers can carry by hand. The machine has been reliable and straightforward to maintain. The knotters needed one tension adjustment in year one; since then perfect.

We bale rice straw after paddy harvest and sell to a mushroom grower. The 9YF-1900 handles the rice straw well after we rake it into proper windrows — without raking, the straw mat from our combine is too tangled for clean pickup. Once the windrow is formed right, the machine runs without issues. The 1,900mm width means we get good per-acre throughput without needing a large tractor. Sold several hundred bales this season without a missed knot.

I keep 30 goats and 15 sheep and needed a baler that produces bales I can feed without opening too much at once. The 9YF-1900 bales at roughly 20–25kg per bale in my fescue hay, which is a perfect 4–5 day supply for my animals without waste. The machine is lighter than the 2200 model I also looked at, which matters for my 55HP tractor. Barn storage is much more efficient with small square bales than the big round bales I had before — I can stack these floor to ceiling.